Home > Crawlers >

Gear Head RC 1.9 UTE Wheels with Delrin Beadlock Rings (4)

More Photos:

RPP Price: $99.99

 In Stock!

Part Number: GEA1011

Set of (4) 1.9, CNC-machined, Delrin (acetal homopolymer thermoplastic) wheels with Aluminum hubs and Delrin beadlock rings. These wheels have a great military/utility look.

Size 1.9"
Drive: 12mm Hex
Width (with beadlock rings): 1.00"
Offset: +.025" (+0.6mm)


*Tire shown in picture is not included
Average Customer Review: 5 of 5 Total Reviews: 3 Write a review.

Recommended Accessories
Gear Head RC 1.9 UTE Wheel with Delrin Beadlock Rings (1) Spare
RPP Price: $25.99

Gear Head RC 8-Lug Hub Spacer Kit, M2 Screws (4)
RPP Price: $6.99


  1 of 1 people found the following review helpful:
Very Nice finish June 21, 2017
Reviewer: Casey from Arcata, CA United States  
I wasn't sure if the CNC machining would leave marks in the delrin or not but I see absolutely no signs of the tool path or machining, they look great. I mounted Pro-Lines Hyrax tires without any issues and installed the wheels on my TRX-4, which it does fit but the clearance on the inside of the wheel is super tight. There's about 1mm-2mm of clearance between 2 of the upper bolts on the portal axles. EDIT: I found it was actually rubbing a tiny bit on the top of the portal axle housing up front. A tiny bit (really just a bit) of filing on the axle made the room it needed. One other thing of note is that the hubs these wheels use have a fairly large hole in the center (7mm) which don't get along with SSD's scale hubs, it was pulling loose the nut on the inside of the scale hubs as they're close to being smaller than the hole. You'll need to use a washer behind the scale hub to keep the wheel tight as well as to stop it from damaging it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
What a great scale wheel January 25, 2014
Reviewer: Joel Sanford from Griswold, CT United States  
These wheels really added to the look of my scale build, glad I purchased them !

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Gear Head 1.9 UTE Wheels November 1, 2013
Reviewer: LASTRAJOLI Don-Philippe from MONTICELLO, corse France  
beautiful wheels Gear Head 1.9 UTE

Was this review helpful to you?

Browse for more products in the same category as this item:

Scale > Scale Tires & Wheels > 1.9 Wheels
Scale > Scale Tires & Wheels
Crawlers > Crawler Tires/Wheels > 1.9 Wheels
Crawlers > Crawler Tires/Wheels

Our Friends Say...