RPPHobby.com

What's Included:

1 X 2 Speed Transmission assembled with motor mount

4 X M3 x 10mm flat head screws

3 X M2.5 x 6mm flat head screws

4 X M3 x 8mm button head screws

2 X M3 x 12mm button head screws

1 X M3 x 15mm threaded set screw

2 X 3mm mini plastic rod ends

Technical Specs:

Internal 1st gear ratio: 4.91:1 (stock Axial is 2.6:1)

Internal 2nd gear ratio: 1.8:1

Output shaft OD: 5mm

Weight (when fully assembled with shift servo) : 335g

Note:

This is a conversion kit, not a complete transmission.

To complete the assembly it requires:

Stock Axial transmission input shaft (AX30198 or AX31149)

Stock 20T drive gear (AX30394, AX30162)

Stock Axial slipper clutch assembly & spur gear

Stock Axial transmission idler shaft (AX31090)

Stock Axial transmission gear cover (AX80078)

Stock Axial transmission bearings:

4 * 5 x 10 x 4mm

5 x 10 x 11mm

8 x 16 x 5mm

15 x 21 x 4mm

Will require shifters to be removed from Wraith interior.

This can be used on an SCX10 but shorter driveshafts are required.

Assembly instructions can be found HERE