 |
 |
 |
|
Increased Stability, Traction and Handling with the Mid-Motor DR10M
The mid-motor, 4-gear transmission in the all-new DR10M RC Drag Race car offers the advantage of using motor torque rotation to apply downward force to the rear tires. These forces generate additional rear end squat for that off-the-line acceleration which offers more tire-to-surface area contact, giving the DR10M additional rear traction.
The mid-motor set up up shifts the weight distribution forward, reducing front-end lift. Additionally, the motor and tires share the same rotational direction, which produces quicker forward momentum to help you get a faster time across that finish line.
The DR10M Drag Race Team Kit is based on the successful DR10 drag race platform. The DR10M Team Kit features a rear anti-roll bar, 28 precision ball bearings, fully adjustable suspension, vertical ball ends for roll center adjustments, 2.6:1 ratio gearbox with heavy-duty sealed gear differential, and externally adjustable V2 slipper clutch. The new Octalock spur gear and 11mm Octalock pads provide maximum consistency and higher torque capacity. Look for a No Prep RC Drag Racing event near you--all are welcome. With 132 feet of head-to-head action, you're sure to enjoy the day racing, running for fun, or just checking out the action.
Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, body, radio, fan, and pinion gear. Assembly and painting required.
Features:
Mid-motor design creates improved traction and control in the vehicle's weight distribution
Durable front and rear wide body mounts
Rigid, 4mm thick carbon fiber rear shock tower
Heavy-duty sealed silicone-filled gear differential
Stiff rear anti-roll bar
Full adjustable double-ladder wheelie bar
Ball bearing wheelie bar wheels with rubber tires for increased straight-line stability
Height adjustable rear gearbox provides the ability to adjust drive shaft angle
All metal gear transmission with hardened steel top shaft
Octalock spur gear and 11mm Octalock pads for maximum consistency and higher torque capacity
4-gear rear transmission configuration aids in controlling weight movement providing more traction under acceleration
Additional Features:
Rear CVA drive shafts for more reliability
V2 12mm Big Bore threaded aluminum shocks
Low center-of-gravity chassis with multiple battery and electronics mounting configurations
Rigid twin deck chassis design
Machined aluminum rear bulkheads
Machined aluminum rear suspension mounts
Rugged steel turnbuckles for adjustable camber and front toe-in
Adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Many Factory Team options already available
28 precision ball bearings
Metric hardware throughout
Specifications:
Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: varies
Width: 272mm (10.71in)
Wheelbase: 327mm (12.87in)
Weight: varies
Internal Gear Ratio: 2.6:1
Drive: 2WD
Required to Complete:
1:10 scale electric motor
Electronic speed control
2S LiPo battery
Battery charger
2-channel surface transmitter
2-channel receiver
Steering servo
Body and paint
1:10 scale 2.2" front tires and wheels
1:10 scale 2.2" or 3.0" rear tires and wheels
Pinion gear
Other helpful items: Silicone Shock Fluid, Silicone Diff Fluid, Body Scissors #1737), Reamer or Hole Punch, FT Wrench Set (#1519), Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers or a Precision Ruler
Electronics pictures in vehicle are not included
|
|
|
 |
|
 |
|
|
|
