Home > Cars & Trucks > Rock Crawlers > Scale & Trail Parts >

BowHouse RC N2R High Clearance Skid Ver2 for Traxxas TRX-4

BowHouse RC N2R High Clearance Skid Ver2 for Traxxas TRX-4


 
More Photos:


RPP Price: $34.99

STOCK STATUS:
 In Stock!


Part Number: BOW-BTX-0050C-V2
Qty:

Description
 
This is the updated version of BowHouse RC's popular N2R High Clearance Skid for the Traxxas TRX-4. 4mm of additional ground clearance is gained compared to the stock skid in critical areas, and they have created smoother surfaces with better angles for sliding over roots and rocks with ease. V2 is printed in ultra strong, ultra high resolution nylon.

Includes:
(1) Skid
(1) M3x8 FHCS
(2) M3X16 BHCS
(1) M3x8 BHCS
(2) M3x30 BHCS

Installation Notes:
  • Reuse stock hardware in stock locations EXCEPT as follows:
(a) use M3x8 FHCS under front of skid to attach transmission (replaces stock M3x10 BHCS)
(b) use M3x16 BHCS to attach front lower links (replaces stock M3x15 BHCS)
(c) use M3x8 BHCS to attach right rear of transmission (replaces stock M3x10 BHCS)
(d) use M3x30 BHCS to attach rear upper links (replaces stock M3x25 BHCS)
  • Completely remove side tray on right side before installing N2R skid.
  • Install front upper link in N2R skid BEFORE securing the skid to the chassis with the remaining 6 screws.
  • Make sure the front upper link screw is properly aligned with the receiving hole in the skid opposite the chassis rail before tightening the front upper link screw all the way.
  • Tighten all screws by hand and be careful not to overtighten. Use of power drivers may result in stripping out screw holes in the N2R skid.
Replaces BOW-BTX-0050C

Average Customer Review: Average Customer Review: 3 of 5 3 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
2 of 5 RPP perfect, the product something else March 25, 2022
Reviewer: John Barnicoat from Weymouth, MA United States  
Tried this skid but too many problems. Amplifies the sound of the motor/tranny so it sounds really loud. And the mounting locations are incorrect height so difficult to get the correct lineup between motor and trans, meaning improper gear mesh, which makes the sound problem even worse. Just can't recommend this skid.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 May 31, 2021
Reviewer: David Simpson from Tulsa, OK United States  
This is a replacement for the same skid I broke... after months of hard driving.  Clearance is better than stock and it is a pretty tough skid. Wish this wasn't a replacement.  RPP was fast as usual with processing and delivery!

Was this review helpful to you?


Browse for more products in the same category as this item:

Cars & Trucks > Rock Crawlers > Scale & Trail Parts
Cars & Trucks > Rock Crawlers
Cars & Trucks > Rock Crawlers > Scale & Trail Parts > Traxxas TRX-4
Cars & Trucks

Our Friends Say...