Home > Electronics > ESC's - Speed Controls >

RC4WD Outcry Extreme Speed Controller 80A ESC with Program Card

RC4WD Outcry Extreme Speed Controller 80A ESC with Program Card


 
More Photos:
RPP Price: $72.99

Note: Some coupon discounts not available

STOCK STATUS:
 In Stock!


Part Number: RC4Z-E0118
Qty:

Description
 


Specifications:
Input Voltage: 2-3S Lipo/5-9 Cells NiMH
Built-in Powerful Switch-mode BEC
BEC Output Voltage-Current: 6V / 7.4V @ 8A
Cont. / Peak Current : 80A / 400A
Applicable to All Weather Conditions
Multiple Protection Functions: Low Voltage Protection, Over-temperature Protection
Recommended Motors: 540 /550 / 775 Motors
Size: 1.96 x 1.68 x 1.04in / 50 x 42.9 x 26.5mm
Program Card Working Voltage: 5.0V - 8.0V
Program Card Size: 1.53 x 0.47 x 22.0in / 38.9 x 12.0 x 55.9mm
Total Weight: 1.37oz / 110.5g
Battery Plug: XT60

Shown installed on RC4WD Carbon Assault 1/10th Monster Truck w/ Manticore Lexan Body Set (Z-RTR0041) for example (Not Included)



What's Included:
1x Outcry Extreme Speed Controller ESC
1x LED Program Card
1x XT60 Female to Tamiya Male Connector Adapter
1x Extension Wire 150mm

Optional Parts:
540 Crawler Brushed Motor 80T (Z-E0001)
540 Crawler Brushed Motor 65T (Z-E0002)
540 Crawler Brushed Motor 55T (Z-E0003)
540 Crawler Brushed Motor 45T (Z-E0004)
540 Crawler Brushed Motor 35T (Z-E0005)
RC4WD Brushed 45T Boost Rebuildable Crawler 540 Motor (Z-E0041)
Brushed 35T Boost Rebuildable Crawler 540 Motor (Z-E0045)
540 Crawler Brushed Motor 20T (Z-E0065)
540 Crawler Brushed Motor 27T (Z-E0067)

Instruction Manuals:

Notes:
Prior to proceeding, be sure to either remove the pinion from the motor or elevate the truck so the wheels are not able to touch the ground.
Do not touch this product while in use to avoid injury. Product emits heat and thus, the heatsink may become extremely hot.
This product is water-resistant.
Begin using your ESC by calibrating with your transmitter. We strongly recommend all users to use the “Fail Safe” function on the radio system and set (F/S) to “Output OFF” or “Neutral Position” . Example of calibrating Neutral range and Endpoint.

Average Customer Review: Average Customer Review: 3 of 5 3 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
3 of 5 RC4WD Extreme ESC September 11, 2021
Reviewer: Geovanny Tirado from Vega Baja, Puerto Rico Puerto Rico  
Installed this to replace a HW1060; looking for the 2 & 3s capability but more important.. to improve the BEC power. Currently my rig have two steering servos,  winch and lights. I wanted the ability to increase the voltage from 6v to the 7.4v and have more amperage available.
At first I noticed the improvement of my steering servos, they were faster and stronger.
The adjustability for the drag brake, initial start, voltage...etc are great.
Really easy to set-up with the external programing card.
I used it for a couple of hours, but actually did not like it, and it will end up to be an spare ESC.  Why:
♣ it runs warmer than expected (compared with HW1060, Castle Mamba X, and HW1080)
♣ too bulky (compared with the HW1080)
♣ the smoothness is not there in slow crawling. It jiggers during start up. (tried different settings and combinations but wasn't as smooth as the HW1080 or the Mamba)
Recommended: for regular trails maybe; for slow/precision crawling not.

Was this review helpful to you?


Browse for more products in the same category as this item:

Electronics > ESC's - Speed Controls
Electronics > ESC's - Speed Controls > Rock Crawler ESC's
Electronics

Our Friends Say...