Combo with Charger and NiMh Battery
Ultra Power UP4AC Plus 30W
Multi-Chemistry AC Charger
Onyx NiMH 7.2V 3000mAh Sub-C Stick with Star Plug
Axial Wraith Spawn 1/10th Scale Electric 4WD - RTR
The Axial Wraith™ Spawn is packed with performance features. This full
bodied version Wraith retains many of the components that made this
vehicle famous. The virtually bulletproof AR60 OCP axles are ready take
the Spawn through its paces whether blasting through the wide open
desert or hammering its way through the toughest rock trails. The
Ripsaw™ 2.2 tires are a proven true grip standard, wrapped around
industry proven Method IFD™ beadlock wheels. Whether you are rock racing
or just backyard bashing, the Wraith™ Spawn is ready for action.
The Wraith™ Spawn includes a number of features that are either waterproof or water resistant. Do not run your product in water or snow or submerge it in water without fully waterproof gear. More information about waterproofing can be found here: http://www.axialracing.com/blog_posts/6067
AXIAL WRAITH™ ROCK RACER
The Wraith™ Spawn is ready for rock spitting, dirt slinging, action. It's designed to tackle the rocks with ease and blast across open desert at full attack speed. The bottom line, the Wraith™ is tough as nails and prepared for any terrain.
FULL TUBE FRAME COMPOSITE CHASSIS
The Wraith™ Spawn 1/10th Scale Electric 4WD Rock Racer features a realistic full tube-frame chassis design that is manufactured with high strength composite materials. The Wraith™ IS BUILT TO GO FAST and is not just a low speed rock crawler.
REALISTIC SCALE DETAILS
The Wraith™ Spawn includes a realistic driver figure complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motorsport version of the helmet are included. Choose your favorite style! And, the Spawn body is compatible with Wraith, AX10 and SCX10 chassis.
METHOD IFD™ BEADLOCK WHEELS
Officially licensed Method 12 spoke beadlock wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith, AX10 Ridgecrest or SCX10. Our IFD™ (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look.
• Three piece beadlock design
• Utilizes new 2x11mm pins for added strength
• Updated plastic hub adapter to eliminate slop and capture the new 2x11mm pin
• Adjustable breather holes for fine tuning tire performance
• Compatible with most 2.2 tires
• Easy six screw disassembly
2.2 RIPSAW TIRES™
The Axial 2.2 Ripsaw™ tire offers both a realistic and aggressive tread design for the ultimate scale appearance and performance.
WB8 HD WILDBOAR™ DRIVESHAFTS
The WB8 HD front and rear driveshafts features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability and easy maintenance.
RECEIVER BOX, WATERPROOF
The waterproof receiver box utilizes three different silicone seals: one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
DUAL SLIPPER CLUTCH
Our dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.
AXIAL AR60 OCP-AXLE™ (OFF-CENTER PUMPKIN DESIGN)
True 4-wheel drive locked differentials are included for improved traction and an offset pumpkin provides more ground clearance and a better driveshaft angle. Additionally, the rear axle has been shaved of any unnecessary items and steering linkages that normally stick down have been removed for as much ground clearance as possible. The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle™ tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle. A locked differential provides the most positive wheel traction in all off-road environments and conditions and requires less maintenance over oil-filled or silicone based differentials. These are easily serviced by removing four screws to gain access for rebuilding and performance tuning as well.
AE-5 ESC, WATERPROOF
The Axial AE-5 ESC is 3S LiPo capable yet easily switched “in the field” between LiPO and NiMh battery types with a simple jumper – no more complex procedures.
• Jumper 1 provides a simple plug and play choice between LiPo or NiMh.
• Jumper 2 switches Drag Brake settings.
• Waterproof design with waterproof On/Off switch / standard plug / laser etched heat sink.
METAL GEAR TACTIC SERVO, 151 oz-in,
The included Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.
Chassis: Full tube composite chassis
Drive: Four wheel with locked differentials and offset pumpkin for
more ground clearance and a better driveshaft angle, AR60 OCP-Axle
constructed from high strength, low flex composite material, axle
tubes are reinforced and beefed up with a boxed-in axle truss to
distribute stress over a larger area
Radio: AX-3 2.4GHz 2-channel pistol grip with steering and throttle
trim and reverse
Steering Servo: Tactic TSX45 metal gear servo with 151 oz-in of
torque, metal gear train and dual ball bearings
ESC: AE-5, waterproof-can be switched between LiPo and NiMH battery
types with a simple jumper, 3S LiPo compatible, drag brake
Motor: 20 turn
Slipper Clutch: Dual pad for added surface area, 32P spur gear
for high-torque applications
Body: Retro styled SUV body with realistic driver figure complete
with race suit and three interchangeable helmets, motocross,
open skull face or motorsport version, body is also compatible
with Wraith, AX10 and SCX10 chassis
Battery Tray: Sized for standard stick pack and LiPo packs up to
1.8x5.9x1.1" (47x150x28mm) in size
Receiver Box: Waterproof, silicone seals for antenna, servo wires and
receiver box lid
Suspension: True four link optimized to reduce axle steer, and to
have the proper amount of anti-squat and roll characteristics
Shocks: Composite body , oil filled
Wheels: Method IFD (interchangeble face design) beadlock design,
black in color, adjustable breather holes for fine tuning tire
Tires: Ripsaw 2.2