At 1/24 scale, the ready-to-run Axial SCX24 Jeep Wrangler JLU CRC 4WD enables any RC enthusiast to stage a crawling adventure anytime and anywhere, indoors or out. Its detailed body and strong performance combine for massive fun in micro size.
No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.
STEEL C-CHANNEL CHASSIS FRAME RAILS
like the 1/10th scale SCX10™ platform, the SCX24™ chassis features
rugged and sturdy steel c-channel frame rails with bracing to keep
everything intact and aligned.
DYNAMITE® 88T BRUSHED MOTOR
Dynamite 88T brushed electric motor provides the right amount of torque
to help ascend steep climbs. It's mated to a steel motor mount to keep
flex to a minimum, which helps protect the gears.
front and rear differentials each house a worm screw and worm gear
setup to get the power to the axles and create higher ground clearance.
DURABLE STEEL AXLES
front and rear axles, front stub axles along with steel dogbones
provide strength and durability to keep things running during tough
climbs and rough trails.
SPLINED DRIVE SHAFTS
front and rear drive shafts are splined and sleeved to allow for
maximum suspension travel while keeping the power to the wheels.
COILOVER SHOCK ABSORBERS
at this small scale, the combination of coilover shocks with simulated
reservoirs and durable plastic suspension links delivers the crawling
performance you've known and expect from Axial.
FRONT AND REAR SOLID AXLES
front and rear axles consist of a two piece, molded plastic solid axle
design. For optimal handling, the SCX24™ suspension features a
three-link front and four-link rear setup.
LED LIGHTS INCLUDED
bright LED lights are included and are mounted in the front bumper. An
extra LED light port on the ESC allows you to add optional LED lights.
4-LINK REAR SUSPENSION
suspension geometry utilizes a 4-Link design for the rear which is
optimized to reduce axle steer and torque twist. We've also included
extra suspension links for adjusting your wheelbase length.
KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
licensed KMC XD Machete wheels are legendary in the off-road world.
They are molded in black and feature stunning scale details, despite the
The officially licensed Nitto Trail Grappler M/T
Tires offer a fantastic blend of off-road performance while still
retaining excellent composure for on-road use.
HINGED BODY SYSTEM
hinged body system offers easy access to on-board components. You can
quickly reach the battery and chassis by removing just two body clips
and swinging the body up.
FULL BALL BEARINGS
because the SCX24™ is smaller in size doesn't mean the features need to
follow suit. No bushings found here, instead the drivetrain is freely
spinning on sealed cartridge bearings throughout the entire vehicle.
AXIAL AS-1 SERVO
just above the front axle is the Axial AS-1 servo, with a servo saver
that allows for steering accuracy, while also providing protection for
the servo gears in the event of a bind or impact.
• Axial AX-4 2.4GHz, 3 Channel Radio System W/3 position switch on CH3
• Axial AS-1 Servo
• Axial AE-6 ESC/Receiver Combo
• USB Charger
• Dynamite 88T 180 Brushed Electric Motor
• Dynamite 350mAh 2S LiPo 7.4V Battery Pack
• 4AA Batteries for the Transmitter
Approximate Assembly Time: No assembly required
Ball Bearings: Full set
Batteries: Dynamite 7.4V 350mAh 30C LiPo
Body: Axial Jeep JL Hardtop
Brakes: Integral with ESC
Charger: USB LiPo Charger
Chassis: Stamped Steel Chassis Rails
Completion Level: Ready-To-Run
Differential: Worm Gear 16T/4T
Ground Clearance: 1.06" (27mm)
Height: 4.2" (106.5mm)
Length: 7.8" (199.5mm)
Motor Size: 180
Motor Type: Brushed 180 size, 88 turn
Radio: Axial AX-4 2.4GHz 2-Channel
Servos: AS-1 Micro Steering Servo
Shock Type: Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm)
Speed Control: AE-6 ESC/RX with Reverse
Spur Gear: 55T
Suspension: 3 Link Front and 4 Link Rear
Tire Diameter: 2.0" (51mm)
Tire Tread: Nitto Trail Grappler M/T
Track: Front and Rear, 3.9" (99.5mm) distance from outer edges of tires measured side-to-side
Vehicle Type: Desert Crawler
Wheel Diameter: 1.0" (26mm)
Wheel Type: Plastic KMC Machete, black in color
Wheel Width: .48" (12.4mm)
Wheelbase: 5.2" (132.5mm)
Width: 3.9" (99.5mm)