 |
 |
 |
 |
Combo with Charger and 3S LiPo BatterySpektrum S150 AC / DC Smart Charger 1x50W Helios RC 3700mAh 3S 11.1V 45C Shorty LiPo Battery with EC3 Plug
 Since this item includes a LiPo battery, we cannot ship it outside the U.S. The
ready-to-run Axial® Capra™ 1.9 Unlimited Trail Buggy is a “new from the
ground up” design that any RC enthusiast eager for cutting-edge
crawling will appreciate. Its Currie F9 Portal Axles provide extra
ground clearance at the diff pumpkin for the best crawling performance.
With the included Spektrum™ STX3 3-channel transmitter and DIG
transmission, you can also switch on the fly between 4WD and FWD —
locking the rear axle whenever you need the tighter turning radius of
front drive power. The Capra features a realistic tube chassis design
and metal gears everywhere, from the center transmission to the lockers
and portal axles. It rides on real-world inspired Nitto Trail Grappler
1.9 tires mounted to licensed Raceline 3-piece molded beadlock wheels.
For pioneering performance in an RC trail buggy with factory-assembled
ease, choose the Capra 1.9 Unlimited RTR. Then just add batteries and
get crawling!
 Includes: (1) Axial® Capra™ 1.9 Unlimited Trail Buggy 4WD RTR with: (1) Spektrum™ STX3 2.4GHz 3-Channel Radio System (1) Dynamite® AE-5L Brushed ESC (1) 540-Size 35T Brushed Motor (1) Product Manual

CURRIE F9 PORTAL AXLES The
Currie F9 Portal Axles add substantially more ground clearance at the
diff pumpkin while also providing an excellent 7.39:1 gear ratio.
Completely ball bearing driven, and metal gears throughout for
durability.

HI-PINION GEARS The ring and pinion gears are machined steel, including the locker. The design utilizes a six bolt design for durability.

DIG TRANSMISSION The
ground up designed transmission features a "Dig" function. With the new
STX3 transmitter, the user can "switch" between 4WD and locking the
rear axle while powering with front drive only, allowing for tighter
turning radius on the rocks. The transmission also includes a full set
of ball bearings and all metal internal gears for strength and
durability. Micro Dig Servo SPMSSX107 included!

UNIVERSAL AXLE SET Universal
joint axles allow up to 45 degrees of steering and provide smoother
action for a higher performing, efficient drivetrain.
Up to 45 degrees of steering Smooth action for an efficient drivetrain Compact yet durable design Hardened steel construction

WB8 HD WILDBOAR™ DRIVESHAFTS WB8
HD Wildboar™ front and rear driveshafts feature a larger diameter cross
pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for greater
strength. A center splined slider floats between each end and has added
material to reduce flex and fatigue.

6MM STAINLESS STEEL LINKS Strong 6mm stainless steel links with high grade plastic rod ends for durability. All links are metal including the steering.

STAINLESS STEEL PIVOT BALLS All pivot points are on stainless steel balls that provide a durable, long-lasting suspension point.

SKIDPLATE WITH BOAT SIDES The Capra features a small skidplate footprint with boat sides to help maneuver and slide over rough, challenging obstacles.

STAINLESS STEEL STEERING LINKS The steering links are also made from 6mm stainless steel, offering precise steering and durability.

LARGE BORE ALUMINUM SHOCKS The
oil-filled shocks are an all-new design with hard anodized, threaded
shock bodies and a single coilover spring. Their increased bore size
creates more fluid volume for better performance. A bleed screw helps to
bleed air from the shock during assembly for greater consistency. The
shocks are also tunable so you can achieve the best dampening rate.
Springs included: AXI233006 Spring 13x70mm 1.72lbs/in Red (2) Soft AXI233008 Spring 13x70mm 2.4lbs/in Green (2) Firm

4-LINK SUSPENSION Fine-tuned
suspension geometry with multiple mounting locations for the upper link
mounts to provide the best crawling capabilities.

NITTO TRAIL GRAPPLER TIRES Get a secure grip on dirt, rocks, and all other off-road trails from the S30 compound Nitto Trail Grappler 1.9 tires.

3-PIECE BEADLOCK WHEELS For
striking scale looks and serious trail performance, Axial® has
outfitted the Capra™ with 3-piece licensed Raceline beadlock wheels.

REALISTIC INTERIOR Realistic
scale details include: polycarbonate interior tray with molded driver
figures, full color pre-cut decals with simulated carbon fiber panels,
mock GPS navigation gauges and switches, two black styrene helmets with
visor decals, and more!

GRILLE AND HEADLIGHT BUCKETS The
molded plastic front grille features two clear plastic headlight lenses
with light buckets and a white LED light installed in each. Behind the
grille, under the hood, are two hood mounts with clips. Remove the clips
to raise the hood up and gain access to the battery tray.

HOOD RELEASE Remove the clips hidden on the underside of the tube frame to raise the hood up and gain access to the battery tray.
 SERVO HORN WITH METAL INSERT The servo horn features a 23T press fit metal insert for durability.

BATTERY TRAY The
battery tray is forward mounted, and located under the hood. The tray
size is built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.

35T BRUSHED MOTOR Delivering
an even balance of speed and technical crawling, the included 540 size,
35T motor features a hassle-free design with enlarged cooling ports for
extended periods of use.

SPEKTRUM™ STX3™ 2.4GHz RADIO SYSTEM The
STX3™ 3-channel radio system offers many features of higher-end 2.4GHz
radio systems like throttle/steering reversing, throttle/steering travel
adjust & throttle limiting, as well as third channel button
controls for dig operation.
Thumb controls allow operation of the dig feature Built-in 3-position throttle limited Steering & throttle rate & trim adjustments with throttle and steering reversing FHSS 2.4GHz protocol offers extended range and interference free performance

SPEKTRUM™ SRX300 RECEIVER, WATER-RESISTANT The
SRX300 is a 3 channel 2.4GHz receiver that operates on the FHSS
modulation. It is conformal coated to help prevent damage from water,
dust and other elements. Features an extra-long antenna lead for easy
and effective antenna placement.

DYNAMITE® AE-5L ESC W/ DRAG BRAKE, WATERPROOF The
Dynamite AE-5L ESC is 3S LiPo capable yet easily switched “in the
field” between LiPo and NiMH battery types with a simple jumper – no
more complex procedures.
LED light bar and two front mounted LED lights included Convenient IC3™ plug lead Jumper 1 provides a simple plug and play choice between LiPo or NiMH Jumper 2 switches Drag Brake settings Waterproof design with IC3™ plug / laser etched heat sink NOTE: Requires shorty battery pack with IC3™ connector.

SPEKTRUM™ S614 SERVO, WATERPROOF The
Spektrum S614 metal geared servo offers 201 oz-in of steering torque, a
metal case for strength, and it’s waterproof for extra protection
against the elements. The axle-mounted servo allows better steering
control in full articulation.

LED LIGHT BAR A
roof mounted LED light bar helps light the way on those late night
crawls with your friends. LED Light bar and two front mounted LED lights
are included.

Approximate Assembly Time: No assembly required Ball Bearings: Full set Batteries: Shorty configuration (sold separately) Body: Separate panels,Polycarbonate, screen printed color scheme Brakes: Integral with ESC Bushing Material: Metal Charger: Sold separately Chassis: Injection molded tubular Completion Level: Kit Differential: Locked Drivetrain: 4WD Shaft Drive Final Drive Ratio: 37:1 Gear Pitch: 32-Pitch Ground Clearance: 3" (76.2mm) Height: 8.25" (209.5mm) Internal Gear Ratio: 5.14:1 Length: 17" (431.8mm) Max Battery Dimensions: 1.02 x 3.8 x 1.8" (26 x 98 x 47mm) Motor Size: 540 35T Pinion: 14T Radio: Spektrum STX3 3-channel, SRX300 3-ch receiver Servos: SX107 micro metal gear high torque steering servo, axle mounted for better steering in full articulation Shock Type: Aluminum body, oil-filled, coil-over spring Size/Scale: 1/10 Speed Control: Axial AE-5L to operate light bar, IC3 battery connector Suspension: 4-link solid axle Tire Compound: S30 Tire Diameter: 4.7" (119mm) Tire Tread: Nitto Trail Grappler Track: Front and Rear, 8.75" (222.2mm) distance from outer edges of tires measured side-to-side Vehicle Type: Scale 4x4 crawler kit Water-Resistant: Yes Weight: 4.5lbs (2.04kg) Wheel Diameter: 1.9" (48.26mm) Wheel Hex Size: 12mm Hex Wheel Type: Raceline 3-piece beadlock monster Wheel Width: 1" (25.4mm) Wheelbase: 12.5" (317.5mm) Width: 10.25" (260.35mm)
Vehicle Battery and charger
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
Transmission with DIG function enables a tighter turning radius by locking the rear axle for FWD power only. Currie F9 Portal Axles increase ground clearance at the diff pumpkin for the best crawling performance. Includes all-metal gears, from the center transmission to the lockers and portal axles. Tube chassis design offers optimum clearance plus realistic scale looks. All pivot points are on stainless steel balls for a durable, long-lasting suspension point. Includes Nitto Trail Grapplers 1.9 Monster tires mounted on injection-molded, 3-piece, licensed Raceline beadlock wheels. Adjustable oil-filled shocks feature hard anodized, threaded shock bodies and a single coilover spring. All-metal front universal axles provide smooth action and 45 degrees of steering angle for an efficient, high-performance drivetrain. Durable, machined aluminum universal. 540-size, 35T brushed motor with enlarged cooling ports delivers an even balance of speed and technical crawling. Spektrum™ STX3 3-channel, 2.4GHz radio system and receiver operate the DIG feature along with other functions. Axle-mounted servo improves steering control in full articulation. Finely tuned suspension geometry delivers the best crawling capabilities.
|
|
 |
 |
 |
 |

|