 |
 |
 |
 |
Store Display This item was used as a store front display. Store front displays will likely have some minor dust from being displayed. ALL STORE DISPLAY SALES ARE FINAL - NO RETURNS.
 Few driving experiences can surpass a well-tuned 1/8 scale Monster Truggy for incredible top speeds and the ability to handle virtually any type of track, surface, or terrain. Able to handle massive 6S LiPo power and including a 2050KV brushless motor, you can utterly dominate lesser models at your local track, skate park, or bash spot. With its aggressive appearance, race-inspired design, high-traction tires, and plush suspension, the Shogun XP can tackle the most challenging terrain or conditions, while asking for more.
With a durable, all-metal four-wheel drivetrain, fully independent suspension, racing chassis, stump-pulling power, and aerodynamic racing bodyshell design, the Shogun XP may be the ultimate electric 1/8 scale monster truggy for drivers looking for an unmatched driving experience.
The Team Corally Shogun XP Monster Truggy features a full suite of water-resistant electronics, so it's ready for driving in most any conditions. Not only is the ESC resistant to splashes of water and mud, but the steering servo and receiver are also protected from the elements by special water-resistant PCB coatings. The receiver is further protected by a sealed enclosure to protect against dust, mud, and moisture. Of course, aerospace-quality rubber sealed ball bearings are standard on the Shogun XP, meaning you can drive virtually anywhere and in most any conditions (Please note: no RC vehicle should be driven or submerged in water or mud. Take care when driving in extreme conditions, and proper maintenance such as cleaning and lubricating should take place after driving in mud, water or near salt water.)
The Shogun XP utilizes an aluminium pan-style chassis for the most efficient and durable chassis layout. With an optimized forward weight bias, the heaviest drivetrain components and other systems are kept as close to the front as possible. Robust, triangulated front and rear chassis braces provide additional rigidity that allows the aluminium big bore shocks and HiCC8 composite suspension parts to perform without the negative effects of chassis plate flex. The reinforced composite chassis side guards have integrated front brackets to provide additional protection for the polycarbonate body and electronics. The exclusive Team Corally's exclusive SPL system secures the shock spring perches, which prevents spring misalignment during extreme compression/rebound, while the innovative RSP Sway Bar system keeps the Shogun planted in corners and ensures consistent handling on all surfaces.
Massive 2050KV Brushless Power With a Team Corally Kuron 2050KV 4-pole motor mounted on a torsion-resistant aluminium 2-piece sliding mount, you can be confident of attaining maximum speeds for big-air stunts! The motor is fitted with a hardened steel pinion gear, which mates to a hardened steel spur gear on the center differential. Looking to achieve remarkable top speeds with a pull of the trigger? Speeds of over 110 km/h (70+ mph) are easy - just fit the appropriate battery!
LiPo Power Ready The battery holder of the Shogun can fit batteries packs in all the popular sizes and is adjustable for maximum versatility. The versatile Team Corally Kuron 2050KV motor can utilize 4S-6S LiPo batteries to optimize performance on any surface or in any conditions!
Durable Steel Drive System with Three Fluid-Filled Differentials The Shogun is fitted with front, center, and rear silicone fluid-filled and sealed limited-slip differentials that ensure the full amount of power from the 2050KV Kuron motor gets to the ground. With easy removal and maintenance, you can even alter each differential individually to fine-tune the amount of traction at either end of the truggy! Inside, you'll find a complete set of metal gears and outdrive cups that connect to steel central driveshafts. The front end is driven by CVD driveshafts, while the rear is driven by robust metal dogbones, with the entire drivetrain supported by aerospace-quality 8x16x5mm rubber sealed ball bearings for maximum efficiency and durability.
Premium Alloy/Steel Center Differential Assembly The critical center diff used on the Shogun XP features an aluminium alloy case and durable, steel spur gear for unsurpassed performance and reliability. The metal case allows optimal alignment of the internal gear assembly through improved heat dissipation and reducing fluid loss, while the steel spur gear ensures maximum power delivery and resistance to damage from dirt or debris.
Optimized Racing Suspension The Shogun XP features a robust pivot ball-style front suspension, utilizing steel pivots and steering turnbuckles in addition to durable composite suspension arms. The rear suspension features composite outboard hubs and one-piece composite upper suspension links. At each corner, durable HiCC8 composite suspension arms and threaded, adjustable 16mm big bore oil-filled shock absorbers produce plush, compliant handling.
Innovative All-Terrain Tires Low-profile, high-grip rubber tires feature inner foam liners, are and adhered to turbine-blade wheels on 17mm hex drive hubs. The optimized multi-surface tread pattern, with exceptionally strong sidewalls, minimizes ballooning and offers maximum control at any speed on any surface.
Varioprop S2R Steering Wheel Controller The Shogun is fully controlled by the ergonomically designed pistol-grip style radio transmitter, which features the latest 2.4GHz technology for interference-free control at a distance of 300m.
The Shogun XP RTR is an exciting, impressive all-terrain machine! If you're looking to make an all-out assault on lesser cars, with speed and jumping capability that other cars simply cannot duplicate, then look no further than the Shogun XP RTR from Team Corally.
|
|
Large Bore (16mm) Adjustable Aluminum Shock Absorbers Big-bore shocks allow the Shogun to soak up terrain that would stop other cars in their tracks! Oil-filled and easily adjustable thanks to threaded shock bodies, they feature race-inspired tuned springs, aluminum caps and special oversize lower spring cups that deliver reliability in the toughest conditions or tallest jumps.
|
Aluminum Suspension Pin Braces The strength and durability of suspension hinge pin braces are critical to any well-handling, reliable vehicle. Team Corally utilizes reinforced aluminum pin braces to support the precision hardened steel suspension hinge pins for buttery-smooth suspension movement and protection against bending or binding, even under the harshest of conditions.
|
|
|
Aluminum Upper Arm Brace/Servo Saver Support Plate The Shogun utilizes a robust brace made from aluminum alloy to secure the upper hinge pin mounts, while at the same time providing added rigidity to the composite steering servo saver system.
|
Machined Aluminium Front and Rear Shock Towers The Shogun includes CNC-machined (not stamped!) 6065 Aluminium front and rear shock towers, a race-inspired design normally found in vehicles costing much, much more! The 4mm thick front tower and 5mm rear are optimized for strength, and durability. In addition, there are multiple adjustments available for suspension settings that allow the Shogun to be tuned to any track conditions.
|
|
|
Heavy Duty, Adjustable, Mono-block Wing Mount The Shogun features a high-downforce rear wing that is supported by a robust monoblock-design rear wing mount. The aerodynamic rear wing delivers massive downforce yet retains durability thanks to being manufactured from high-impact plastic in order to endure a competitive race or grueling bash session. The wing mount with additional bracing to maintain proper wing alignment during the most severe jumps and occasional tumbles features a fully adjustable design to allow for any downforce angle-ensuring the Shogun is best suited for top speed, incredible handling, or something in the middle!
|
High Performance Racing Differentials with CNC-Machined Gears The Shogun's drivetrain contains three adjustable, fluid-filled differentials to efficiently transfer power to all four corners. Featuring CNC-machined and hardened spiral-cut steel bevel gears, six planetary gears and 52 tooth spur gear on the center diff, the handling and acceleration of the Shogun can be controlled independently between front, center and rear by varying the thickness of the internal fluid.
|
|
|
Heavy-Duty Front Shock Tower/Chassis Brace The reliability of the Shogun is further optimized through a robust composite brace assembly that ties the shock stay to the chassis plate for strength, durability, and consistent handling.
|
LWB Aluminum Chassis with Heavy Duty Composite Chassis Braces The heavy-duty aluminum chassis plate used on the Shogun features additional front, mid and rear composite braces to maintain chassis and driveline integrity under the harshest of bashing conditions or tallest jumps. The optimized design delivers maximum strength and contact area for reliability, durability, and consistent handling.
|
|
|
Aerospace Ball Bearings with Rubber Seals The Shogun uses large, aerospace-quality rubber-sealed ball bearings that resist dirt and reduce rolling resistance for the highest possible performance.
|
Oversized 12mm One-Piece Composite Links Contributing greatly to the Shogun’s durability are the one-piece composite suspension links. The robust design and precision molding ensure that the Shogun’s suspension and steering geometry are always on-point!
|
|
|
Extra Large Battery Compartment The Shogun features a huge battery compartment (161 mm x 51 mm) to allow a vast array of different LiPo batteries to be used. Additional convenience is provided by included spacers that deliver the security that only a perfect battery pack fit can provide. The assorted spacers allow quick and easy battery changes-even changing from 4S to 6S is a simple, easy, and convenient.
|
Premium Alloy/Steel Center Differential Assembly The critical center diff used on the Shogun features an aluminum alloy
case and durable, steel spur gear for unsurpassed performance and
reliability. The metal case allows optimal alignment of the internal
gear assembly by improving heat dissipation and eliminating fluid loss,
while the steel spur gear ensures maximum power delivery and resistance
to damage from dirt or debris.
|
|
|
Bulletproof, Steel Drivetrain with Extra Large Rubber-Sealed Bearings As usually seen only on premium competition-level RC vehicles, the Shogun is fitted with front, center, and rear silicone fluid-filled and sealed limited-slip differentials that ensure the full amount of power from the 2050KV Kuron motor gets to the ground. With easy removal and maintenance, you can even alter each differential individually to fine-tune the amount of traction at either end of the truggy! Inside, you'll find a complete set of metal gears and outdrive cups that connect to steel central driveshafts. The front end is driven by CVD driveshafts, while the rear is driven by robust metal dogbones, with the entire drivetrain supported by aerospace-quality 8x16x5mm rubber sealed ball bearings for maximum efficiency and durability.
|
Oversized Composite HiCC8 Parts Plastic components used on the Shogun are manufactured from a Team Corally-proprietary, custom-blended HiCC8 polymer for strength and precision, while the race-engineered, torsionally-optimized design of the parts themselves provide the ideal balance of rigidity, flexibility, and durability.
|
|
|
Heavy-Duty 3mm 7075 Aluminium Steering Plate The Shogun has a precise and direct steering feel thanks to an oversized 3mm thick Ackermann-adjustable steering plate. Made from premium 7075 material for strength, details like these guarantee a quality driving experience!
|
Innovative All-Terrain Tires Low-profile, high-grip rubber tires feature inner foam liners and adhered to turbine-blade wheels on 17mm hex drive hubs. The optimized multi-surface tread pattern with exceptionally strong sidewalls minimize ballooning and offers maximum control at any speed on any surface.
|
 100+ km/h (65+mph) possible Pre-built racing truggy with electronics, bodyshell and tyres install Team Corally TOROX 185 ESC 4-6S with LiPo protection (programmable) Team Corally Kuron 2050kV 4-pole brushless motor 4-6S Varioprop CRHV-7225 High Torque, High Voltage Digital Servo, Metal Gear, 25Kg Torque Ergonomic Varioprop S2R transmitter, with interference-free 2.4GHz technology Aluminium servo arm 3mm 7075 Aluminum Ackerman Plate Separate splash-proof and dustproof electronic box with transponder mount XL Adjustable battery holder for all common LiPo batteries Full set of ball bearings, rubber sealed All transmission ball bearings are 8x16x5mm Hardened steel spur gear and motor pinion Three sealed metal differentials individually filled with silicone oil Aluminum/Steel central differential Quick + Easy diff access 2-piece aluminium motor holder with composite gear cover 52T Steel Central gear Complete Hard Coated metal drive train Extra Surface Hardened Steel front CVD joints Aluminium 17 mm drive hexes Oil-filled threaded 16 mm aluminium Big Bore shocks Shock spring perches locking system CNC aluminium shock towers, 5mm rear / 4mm front Independent Pivot Ball front suspension Independent double wishbone rear suspension Optimized, custom developed composite parts Reinforced truggy front steering blocks and rear hubs Aluminium suspension mounts with composite cover Central Roll Cage Mount Heavy-Duty one-piece composite suspension links and tie rods Aluminium suspension mounts with composite cover Team Corally RSP anti-roll bar system, front + rear Aluminium chassis plate Reinforced chassis side guards with integrated body protection Heavy Duty front and rear chassis braces Reinforced High Downforce Wing + Wing Holder with tower connecting brace Pre-glued high-speed low-profile tyres on black nylon rims Sturdy, elaborately printed polycarbonate body Many tuning parts available for individual customization
4S or 6S LiPo battery (XT90 connector) Charger 4x AA batteries
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
Alloy Center Diff 50T Steel Main gear Updated Suspension Arm Front Lower Updated Suspension Arm Rear Lower Updated Servo Saver Plate Updated Rear Chassis Brace Updated Front Shock Stay Brace Updated Rear Shock Stay Braces Updated Wing Stay New Ackerman Plate 7075 material 3mm Updated Wing Connecting Brace Alloy Front Upper Arm Stiffener Plate Extra Hardened Drive Joints Composite Steering links Composite Rear Upper Links Front and Rear Bumpers w/ integrated Skid Plate 25 KG Digital Servo - HV - Steel Gears - CRHV-7225"
|
|
 |
 |
 |
 |
|
 |


|