This simple device will let you turn your rig's lighting on and off from a free channel (Channel 3. AUX, etc.) on your remote control.
If your lighting gets its power by plugging into your receiver, just plug this Remote Switch into the receiver first, then plug your lighting into it.
Maximum Switched Current: 10A
Go to your transmitter and use your Channel 3 switch. If it is a two position channel, flip the switch to turn the lights on and off. If it is a three position third channel, the two outer positions will give you on/off. If you have a linear third channel, move the control from one end to the other. You will notice the output switching somewhere near the center of the control's motion.
|