|
|
|
|
UF-7C Controller
MyTrickRC's UF-7C Controller was born out of it's earlier cousin, our original UF-7 Controller. The success of the UF-7 Controller literally created MyTrickRC! The original UF-7's Rock Solid Electronics and Software, together with it's Plug & Play Design, and Simple Operation made it the obvious choice for RC Enthusiasts across the RC Hobby. The Electronics in the original UF-7 were Tough and Reliable both by design and we don't cut corner on materials or components.
From MyTrickRC: "After many years of excellent success with the UF-7, we discovered that with a few simple tweaks, we could make it even better, and greatly enhance it's Overall Performance and Value. The UF-7C Controller uses the exact same Rock Solid Electronics as the original UF-7, but with four small, but powerful, upgrades. First we changed the MODE Button to be waterproof, making the UF-7C Fully Controller Waterproof! Then we also upgraded all the connectors on the UF-7C Controller to be Gold Plated, further enhancing their long term contact performance, particularly around water! But we didn't stop there, we also upgraded the PigTail Output to support up to 2 Amps of Current! This means the UF-7C can Power Light Bars, Rock Lights, Halos, or MyTrickRC High Power Lights, and even certain Light Bars from Other Brands**! Yes, that's right, if you already have a Proline, or Any Light Bar that powers off the Receiver, you can power it from the UF-7C! Not only does this reduce the amount of wires to fuss with, the UF-7C Controller has a Plug & Play option that adds Remote On/Off Control of all your LEDs, including the Light Bar!
On the Software side of the UF-7C Controller, we made equally huge improvements! We figured out a completely new way to re-write the UF-7C Controller programming code, unleashing the full potential of the UF-7C Controller's Micro-Processor and onboard Memory to greatly expand the LED Blink Functions in EVERY MODE. So all the MODEs on the UF-7C got more blink features added to them. Some examples of features we added are*: Off Road MODEs with Optional Remote On/Off Control, Center Brake Light, Backfire, Automatic Hazard Lights, additional Emergency Strobes, Scale Warbird with Switchable Wig-Wag Landing Lights and so much more!"
The UF-7C Controller includes: 1pc UF-7C Controller 1pc Servo Y-Cable 1pc 9V Battery Adapter Mounting Hardware
NOTES
- The Power Ratings for the UF-7C Controller are: 4.5-12VDC, 2 Amps MAX.
- UF-7C Controller's Pigtail Output passes Receiver Power straight through it. Therefore the voltage on the Pigtail Output will be the same as your Receiver. CAUTION - Do Not draw more power off your receiver than it's rated for.
- UF-7C Controller's Port E (Headlights Port) can be used to power Headlights and/or Running Lights. Port E stays ON STEADY in all Land Vehicle MODEs.
- Each port on the UF-7C Controller can power LOTs of LEDs, but the more LEDs you add to one port, the dimmer all of them will become. We recommend trying not to exceed 4 LEDs per UF-7C Controller LED Output.
- A Higher Input Voltage on the UF-7C will make all of your LEDs slightly Brighter, However it's better for the Controller if you don't exceed 9VDC.
- MyTrickRC sells LED Splitter Cables which allow you to add more LEDs to a port. However, you can't mix all LED colors together on one LED Splitter.
* The NEW Blink features we mentioned are only in certain MODEs
** The UF-7C Controller Can Power:
- 1pc Attack 5" or 6" Light Bar, or Light Bar from Other Manufacturer
OR 1 pair of
- Attack 17mm Round Wafer Headlights
- Attack 19mm Rectangular Wafer Headlights
- Attack Halo Headlights
- NEWAttack 7-LED Wafer Strip Light
OR
- 4 pairs of Attack Spot Lights, original Attack Headlights, Attack Rock Lights, or Attack 9mm Wafer Lights
|
|
|
|
|
|
|
|
|