Home > Cars & Trucks > Rock Crawlers >

Axial Yeti Jr Can-Am Maverick X3 T 1/18 4WD RTR

Axial Yeti Jr Can-Am Maverick X3 T 1/18 4WD RTR

More Photos:

RPP Price: $174.99

Note: Coupon discounts not allowed
by manufacturer

 In Stock!

Part Number: AXI90069


The Yeti Jr RTR takes everything you admire about the 1/10 scale Yeti chassis and shrinks it down to 1/18 scale then tops it off with a licensed Can Am Maverick X3 body for a fun 4WD that anyone can handle. Out of the box, this tiny terror is ready for scale adventures! Before the Yeti, the only place to find an independent suspension with floating solid rear axle was in full-size off-road vehicles. Axial carried its advantages over into RC rock racers and crawlers. The suspension design give the Yeti Jr responsive handling, increased clearance, and improved stability at high speeds. Its included 380-size motor adds the perfect amount of speed and torque. When that muscle meets the tread of the Maxxis Bighorn 2.0 radial tires, you've got all the traction you need for fast, smooth rides over virtually any surface.

The body mount system allows easy access to the electronics with only the removal of two body mount clips.

Maxxis Bighorn 2.0 tires feature a non-directional tread pattern that is suitable for use in a wide variety of conditions such as hard packed dirt, soft terrain, and traversing scale trails in your backyard! The wheels feature a standard sized 12mm hex for a strong, durable fit.

The battery tray is fully height adjustable with multiple configurations available. It's easily changeable between 6-Cell NiMH battery packs or smaller battery packs. The integrated battery tray can be easily accessed without having to remove any body clips or even the body, allowing for quick battery swaps.

The rear driveshaft is centered for efficiency, and is mated to the rear differential outdrive which is captured by a bearing to keep things running smoothly.

The STX2 2-channel radio system offers many features of higher-end 2.4GHz radio systems like throttle/steering reversing, throttle/steering travel adjust & throttle limiting.
Transmitter Features:
Built-in 3-position throttle limiter
Steering & throttle rate & trim adjustments with throttle and steering reversing
FHSS 2.4GHz protocol offers extended range and interference free performance
AA batteries included

The Spektrum ESC/receiver is an all in one unit featuring an EC3 battery connector, a convenient onoff switch and it's water resistant for peace of mind when water splashes on your electronics.

WARNING: This product is only compatible with NiMH batteries. Do not use a LiPo battery or fire causing serious injury or damage to property may occur.

Delivering an even balance of speed and technical adventuring, the Dynamite Tazer 380 37T motor features a worry-free design with enlarged cooling ports for extended periods of use. The motor is paired with a 15T pinion and 60T spur gear for extra speed!
37T, 380 size motor

Steering is powered by a Spektrum high torque micro servo, featuring a metal gear train to help withstand rough offroad conditions.
4.8V Torque: 34.9 oz-in (2.5 kg-cm)
6.0V Torque: 41.8 oz-in (3.0 kg-cm)
4.8V Speed: 0.09 sec/60
6.0V Speed: 0.08 sec/60

The included Dynamite 1300mAh NiMH battery pack features a convenient EC3 connector and a 1300mAh charge capacity.
Type: NiMH
Connector Type: EC3
Capacity: 1300mAh
Cell Size: 2/3A
Voltage: 7.2V
Configuration: Flat

The Dynamite 6-Cell NiMH USB battery charger is small, compact, and easy to operate. Simply plug into a USB power source and plug the NiMH battery into the charger and you're charging.


To help keep the scale premise in check, simply shrinking down an existing axle was just not an option. In keeping the proportions correct along with yielding ample terrain clearance a new axle was designed, the AR18. Features include a compact two-piece design, captured pinion gear, and three-linked rear suspension with integrated sway-bar like support design for improved handling.
Rear suspension features:

8mm axle with 12mm hex adapter
Open diff
61mm-90mm 7mm diameter shocks with 3mm shocks shafts
Multiple shock mounting positions

The threaded shock bodies hold a single coilover spring. They are oil filled and allow you to tune the damping rate.
46mm-63mm 7mm diameter front shocks
61mm-90mm 7mm diameter rear shocks
3mm shock shafts

The Yeti Jr. features a three-linked rear suspension design with integrated sway-bar like support for improved handling. The rear axle has upper and lower mounting points for the trailing arm, allowing you to fine tune your suspension setup.

The Yeti Jr. is equipped with an Independent Front Suspension (IFS) system to help maintain high-speed stability when running through a diverse range of terrain. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. The stability that the IFS front end provides is paramount for off road racing.

Front suspension features:
Machined aluminum CVD's
8mm axle with 12mm hex adapter
Open diff
2.50mm hingepins
46mm-63mm 7mm diameter shocks with 3mm shocks shafts
Multiple shock mounting positions

No micro gearing here, instead the drivetrain features 48P gears, which is not only a robust design but also expands the number of possible gearing configurations. The spur gear is mated to a 15T metal pinion gear for optimal gearing.

Adjusting gear mesh to accommodate different sized pinion or spur gears has never been easier with the help of a cam style motor mount design. The front top plate secures the cam motor plate in place and all the screws thread down into the chassis, eliminating the need for extra-long hex drivers in order to secure the motor and gear mesh.

Just because the Yeti Jr. is smaller in size doesn't mean the features need to follow suit. No bushings found here, instead the Yeti Jr. drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.

Key Features:
Licensed Can-Am Maverick body and wheels
Licensed Maxxis Bighorn 2.0 tires
Spektrum STX2 2.4GHz transmitter
Spektrum waterproof ESC/Receiver Combo
Dynamite 37T brushed electric motor
High-torque metal gear servo for rough offroad conditions
AR18 solid rear axle with ample ground clearance
Adjustable coilover shocks
Three-linked rear suspension for improved handling
Independent front suspension for high speed stability
Rear hinge body mount system
48P gears give you more possible configurations
Adujstable motor mount and easy access chassis
Full vehicle ball bearings
Adjustable battery tray
Centered rear driveshaft for efficiency
Easy to Use USB Charger Included

Needed to Complete:

Nothing! Everything you need to begin having fun with the Yeti Jr Can-Am Maverick X3 is included.

What's in the Box?:
(1) Yeti Jr Can-Am Maverick X3 RTR Car
(1) Spektrum 2.4 GHz STX2 Transmitter
(1) 7.2V 6 Cell 1300 mAh NiMH Battery Pack
(1) USB NiMH Charger
(4) AA Alkaline Batteries
(1) Product Manual
Spare Parts and Tools

Approximate Assembly Time: No assembly required
Ball Bearings: Full set, sealed cartridge type
Batteries: Dynamite 7.2V 1300mAh NiMH with mini EC3 connector, flat configuration, 2/3A cell size
Body: Can-Am Maverick X3 UTV, trimmed and painted, rear hinge body mount system
Bushing Material: Metal
Charger: USB NiMH with red and green status indicators
Chassis: Molded tub style with rear trailing arms
Completion Level: Ready-To-Run
Differential: Bevel gear 35T/15T
Drivetrain: 4WD Shaft Drive
Front Track: 6.9" (175mm), distance from outer edges of tires measured side-to-side
Gear Pitch: 48-Pitch
Ground Clearance: 1.1" (27mm)
Height: 6.5" (165.1mm)
Length: 11" (279.4mm)
Motor Size: 380 Brush Equipped, 37 Turn
Motor Type: Brushed 380 size
Pinion: 15T
Radio: Spektrum FHSS 2.4GHz STX2 2-channel
Rear Track: 6.9" (175mm) distance from outer edges of tires measured side-to-side
Servos: Spektrum SX107 high torque micro w/metal gears
Shock Type: Coil over, oil-filled, 3mm shafts
Size/Scale: 1/18
Speed Control: ESC/Receiver combo, Water Resistant
Spur Gear: 60T
Suspension: Front-Independent, Rear-3-Link w/integrated sway bar like support, AR18 2-pc solid rear axle w/captured pinion gear
Tire Diameter: 2.8" (72mm)
Tire Tread: Non-directional tread pattern for use on a variety of terrain, S30 firmness compound
Vehicle Type: Off-road
Water-Resistant: Yes
Weight: 1.6lbs (0.7kg)
Wheel Diameter: 1.2" (30.5mm)
Wheel Hex Size: 12mm Hex
Wheel Type: Plastic, black in color, 12mm hexes
Wheelbase: 8.1" (205mm)
Width: 7" (177.8mm)
Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 4 Write a review.

Recommended Accessories
Dynamite Speedpack 2 6-Cell 7.2V 1200mAh NiMH Battery Long with EC3 - Yeti Jr. (Mini's)
RPP Price: $22.99

Dynamite Speedpack 2 6-Cell 7.2V 1200mAh NiMH Battery Long with EC3 - Yeti Jr. (Mini's)
Axial ST28 Razor FR / Paddle RR Tire Set for Yeti Jr. (4)
RPP Price: $28.99

Axial ST28 Razor FR / Paddle RR Tire Set for Yeti Jr. (4)
Spektrum SX107 Micro Metal Gear Servo
RPP Price: $17.99

Spektrum SX107 Micro Metal Gear Servo

  0 of 0 people found the following review helpful:
4 of 5 September 18, 2020
Reviewer: Ed Dudek from Elma, NY United States  
Arrived early. Thanks. Needs to go faster

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Fun little car January 14, 2020
Reviewer: Greg Wilson from Hesperia CA United States  
Got this for my kid and he loves it. Handles good. Pretty quick for it's size. Just a fun little car. Only issue I have had was ran one battery through it and it worked great plugged another battery in and the steering worked but it would not move. It turned out to be the motor was not plugged in all the way. Plugged it back in and has worked great ever since.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Awesome December 11, 2019
Reviewer: Anonymous Person  
Great little car.  My son loves it for his trailer and scale crawler

Was this review helpful to you?

  1 of 2 people found the following review helpful:
5 of 5 Fun Scale Atv March 14, 2019
Reviewer: Ernst Ebner from Oregon, WI United States  
I can say that my initial impressions are favorable.It is of about usual Axial quality and comes with a few spare parts, but note the mainshaft is plastic and I expect it to break at some point.I was disappointed to see replacement parts are not in the same red color as the original parts. SPEEDY delivery as usual from RPP.

Was this review helpful to you?

Browse for more products in the same category as this item:

Cars & Trucks > Rock Crawlers
Cars & Trucks > Rock Crawlers > Scale & Trail Kits / RTR's
Cars & Trucks > Rock Crawlers > Rock Racer/Bouncer Kits & RTR's
Cars & Trucks > Mini & Micro
Cars & Trucks

Our Friends Say...