|
Max10 ESC Features:
The MAX10 uses a Motor Thermal Protection circuit (in Sensorless Mode) When pairing the MAX10 with a Hobbywing matching motor (i.e. EzRun 3652/3660 G2 motor), the temperature sensor cable on the ESC will monitor the motor temperature and protect the motor from irreversible damage due to overheating in real time.
Motor Thermal Protection Temperature Sensor Cable (on the ESC) for Connecting to the TEMP Sensor Port (on EzRun 3652/3660 G2 Motor)
Capacitor Thermal Protection The capacitor thermal protection first implemented in the MAX10 will effectively protect capacitors from diaelectric failure causing irreversible damage to the ESC due to overload.
High Reliability & Durability Built
with high-quality components and coupled with cutting-edge firmware,
the MAX10 is able to deliver unmatched power and performance for even
the most extreme racing applications, but it is also responsive enough
to protect itself from damage due to overloading due to physical abuse,
overuse or even human error.
Super Internal BEC The
built-in switch mode BEC with a maximum output of 6A and voltage
adjustable between 6V and 7.4V allows the use of various high voltage
servos.
Applicable to All Weather Conditions The
waterproof and dust-proof design allows the MAX10 to be used in all
weather conditions without any issue of damage caused to the ESC from
water or debris.
Advanced and Secure Electronic Switch The MAX10 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.
Regular Firmware Updates Free of Charge You can upgrade the MAX10 with the Hobbywing WiFi/USB LINK software, a WiFi module/ LED or program box and a smartphone/laptop. Hobbywing updates its ESC firmware regularly giving you upgraded features more often when available.
Max10 ESC Specs: Max Input Voltage: 2-3S LiPo/6-9 Cells NiMH Amp Rating: 60A Brake: Proportional with adjustable curve Reversible: Yes - with lockout Low Voltage Cut-Off: Yes, programmable Size: 39.4x32.8x23.1mm (w/o Fan) Weight w/ Wires: 67.8g Output Motor Connectors: 3.5mm bullet
3652SL 4000KV Brushless Motor Features:
High Torque The
4 pole design will guarantee the motor to produce very large amounts of
torque, a much faster acceleration response and a very stable output of
power to the drivetrain.
Low Cogging Torque The first
motor adopted the innovative 4-pole-8-magnet "staggered pole" rotor
(Hobbywing-patented design) (in the RC field) has the extremely low
cogging effect and low torque pulsation (it's reduced by 85% when
comparing with conventional 1/10th scale 4-pole motors).
Motor Thermal Protection When
pairing the EzRun 3652/3660 G2 with a Hobbywing EzRun MAX10-SCT or
MAX10 ESC, the built-in temperature sensor and sensor port at the load
end (for connecting to ESC) will make the motor thermal protection
available to protect the motor from damage due to overheat
Excellent Structure The
O-ring seal fitted between the front end bell and motor case isolates
screw holes from inner parts to prevent liquid or dust from getting
inside and protect motor from damage. The special design implemented by
the motor case (the end attaches to the front end bell) isolates inner
coils from outside to protect winding from being damaged by overlong
screws.
High Efficiency Hobbywing’s temperature control
technology has been designed to protect the motor from being damaged by
heat thus less heat more efficient the motor will run and perform. The
output performance of this motor has an efficiency rate of up to 90%, a
leading level in the RC world.
Quality Materials & Excellent Design The
use of double insulated windings (240℃ R-leveled), high-intensity
adhesive (340℃), Japanese bearings and silicon steel sheets guarantees
users the outstanding performance and super durability. The wheel hub
design of the front & rear end bells reduces the motor weight.
Compatible (with the EZRUN MAX10-SCT/MAX10 ESC) When
pairing the EzRun 3652/3660 G2 motor with a Hobbwing EzRun MAX10-SCT/
MAX10 ESC, the excellent match between ESC and motor will give you large
torque plus a very smooth and linear power band.
3652SL 4000KV Brushless Motor Specs: Max Input Voltage: 3S 11.1V Lipo Weight: 216g (7.62oz) Motor Diameter: 36mm Motor Length: 52mm Shaft Diameter: 3.175mm (1/8") Connector: 3.5mm bullet
|
|
|