RCV Licensed VVD Axle Shafts for Axial AR60 Axles
Replaces stock axle shafts with a strong chromoly VVD style joint
RCV style cap for scale realism, is used to retain standard AR60 VVD pin
Large 8x15x5mm inner bearing (included) increases strength over stock 10x15x4 bearing
6mm stub axle increases the strength through the pin on the stub axle, uses a 5mm threaded stub (requires 8mm nut driver)
Aluminum 12mm hexes are included to fit with 6mm stub, hex pins also included
6x11x4 bearings included for outer knuckle bearing
Some rubbing may occur initially at the link mount screws due to larger diameter shafts.
*May require slight grinding of screws that hold lower link mounts.
**Intended for use in AR60 axles with locked differentials. If using an open differential, the axle tang will need to be shortened slightly.