Home > Electronics > Servos >

Hitec RCD D954SW High Torque Steel Gear Digital Servo
Hitec RCD D954SW High Torque Steel Gear Digital Servo

RPP Price: $99.99

Note: Coupon discounts not available

 In Stock!

Part Number: HRC36954

The power of Hitecs D-Series servos continues with the introduction of the next Premium Class trio: the D930SW, D954SW and D955TW. As with our entire D line, these technologically-advanced servos are powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. Their unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. Built with incredibly durable steel gears, the D930SW are the perfect upgrade from our popular HS-7954SH servo. Advancing servo technology and providing superior engineering has always been Hitecs mission and that continues today as we expand our outstanding D-Series product line.

Programmable PWM Digital Amplifier
32-Bit MCU with 12-Bit ADC Circuitry
4096 Resolution
1M Cycle Long Life Potentiometer
Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
Dual Ball Bearing Supported Output Shaft
25-Tooth Output Spline
Coreless Metal Brush Motors
Nylon Reinforced Plastic Upper and Lower Case
Diamond Cut Aluminum Heat Sink Center Case
Dust Resistant and Splash Proof Case

Programmable Functions:
End Point Adjustments
Fail Safe
Dead Band
Speed (Slower)
Soft Start Rate
Overload Protection
Data Save / Load
Program Reset

3 Steel Alloy Gears Set | Link |
Metal / Karbonite 1st Gear Set | Link |
Plastic / Aluminum Case Set | Link |
Applicable Horns & Screws

Performance Specifications
Operating Voltage Range (Volts DC): 4.8V ~ 7.4V
Speed (Second @ 60): 0.19 ~ 0.12
Maximum Torque Range oz. / in.: 251 ~ 405
Maximum Torque Range kg. / cm.: 18.0 ~ 29.0
Current Draw at Idle: 30 mA
No Load Operating Current Draw: 500 mA
Stall Current Draw: 5,200 mA
Dead Band Width: 1 s

Physical Specifications
Dimensions (Inches): 1.57 x 0.78 x 1.46
Dimensions (Metric): 40.0 x 20.0 x 37.0
Weight (Ounces): 2.40
Weight (Gram): 68.0
Circuit Type: 32bit Programable Digital
Motor Type: Coreless Metal Brush
Gear Material: MK 1st Gear & 3 Steel Alloy Gears
Bearing Type: Dual Ball Bearing
Output Shaft (type / mm): H25T
Case Material: Plastic / Aluminum
Dust / Water Resistance: Splash Proof
Connector Gauge (AWG) / Strand Count: 20 / 80

Radio Control Applications
Parkflyer: N / A
Sport Plane: 30 - 40%
Sailplane: 2 meters and up
3D Performance 30 - 40%
Scale: 30 - 40%
Electric Helicopter: N / A
Gas Helicopter: N / A
On Road: 1/8th
Monster Truck: 1/8th
Buggies: 1/8th
Truggies: 1/8th
Short Course / Truck: 1/8th
Crawlers: 1/8th
Sail Boat = >1M & Scale
Power Boat N/A

Replaces HRC37954S

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Electronics > Servos
Electronics > Servos > Crawler Servos

Our Friends Say...