With improved steering and durability, the TEQ Ultimate Scale Axles are a modern version of the Yota II axles designed as an upgrade for Axial SCX10 II and Element Enduro line of RC trucks. These scale axles are cast from a high grade aluminum alloy and come with integrated suspension link mounts that construct a single, hardened unit. Solid and maneuverable, this set features universal style XVD shafts that deliver a tighter turning radius and high strength driveline. Bringing the Axial SCX10 II and Element Enduro RC trucks upgraded soundness, the ring and pinion gears are a CNC machined, hypoid tooth design and are linked to a 6 bolt hardened steel locker. The C-hubs feature interlocking grooves on the front axle which enables caster customization and the front pumpkin is offset providing more ground clearance. All of this is packed into a high strength cast aluminum case with a long lasting powder-coated finish.
Specifications:Cast Light Weight Aluminum Housing
Hardened Steel Ring and Pinion Gears
5mm Axle Output Shaft
Full Ball Bearings
Powder-coated in Black
Width: 189.6mm / 7.46in
Gear Ratio: 8T/30T
12mm Steel Wheel Hex
Weight: 4.97oz / 141g
Shown installed on Axial SCX10 II for example (Not Included) ![]()
![]()
What's Included:1x TEQ Ultimate Scale Cast Axle (Rear)
Other TEQ Axles:TEQ Ultimate Scale Cast Axle (Front) (
Z-A0127)
Replacement Hardware:M4 Flanged Lock Nut (Black) (Z-S0620)
M2 X 3mm Set Screws
Steel Socket Head Cap Screws M2 x 5mm
Steel Socket Head Cap Screws M2 x 10mm (
Z-S0849)
Steel Button Head Cap Screws M2 x 4mm
Replacement Parts:TEQ Ultimate Scale Cast Axle Diff Cover and Third Member (
Z-S1980)
TEQ Ultimate Scale Cast Axle Housing (Rear) (
Z-S1979)
TEQ Ultimate Scale Cast Axle Straight Axle Shafts (Rear) (
Z-S1981)
TEQ Ultimate Scale Cast Axle Ring and Pinion Gears W/ Locker (
Z-G0076)
Notes:Fits Axial SCX10 II
Fits Associated Element Enduro
Please do routine maintenance.
Check the grease around the gears and also oil the bearings.
Do not over tighten screws as you can strip the holes.
Use Locktite but do not use too much or you can damage the casing.
