Home > Cars & Trucks > Rock Crawlers >

SSD RC Overdrive Axle Gear Set (8T/27T) for Trail King & SCX10 II

SSD RC Overdrive Axle Gear Set (8T/27T) for Trail King & SCX10 II


 
More Photos:


RPP Price: $24.99

STOCK STATUS:
 In Stock!

Part Number: SSD00349
Qty:

Description
 
Features:
CNC Machined
Hardened steel
6 bolt design
8T/27T ratio for 10% overdrive (compared to stock 8T/30T)
Fits SSD HD 6 bolt steel locker (SSD00196)
Direct fit in Axial AR44 SCX10 II axle
Direct fit in SSD Pro44, Diamond Pro & Trail King axles

Specifications:
Ratio: 8T/27T for 10% overdrive (compared to stock 8T/30T)
Mounting bolts: 6 bolt design

Includes:
27T Ring gear
8T Pinion gear shaft

Average Customer Review: Average Customer Review: 2.5 of 5 2.5 of 5 Total Reviews: 6 Write a review.

  0 of 0 people found the following review helpful:
 
2 of 5 Ssd 27t/8t ar44 gear set January 15, 2020
Reviewer: Anonymous Person  
I purchased these gears to replace the hr3 bolt diff overdrive set I installed them in my vanquish housings just like my previous gear set and had nothing but binding tried shimmying changing pinions even tried installing in a stock housing and a boom racing housing all three had nothing but issues now I'm back and forth with SSD and they're telling me that it's not a warranty issue I've used their products for a long time but I may think twice if they don't get this fixed for me

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 Disappointed December 20, 2019
Reviewer: dave fout from glendale, AZ United States  
The gears have a very rough mesh, shimming heled but did not solve the issue. These were installed into stock axial housings. They were removed and the stock gears re-installed. I do not recommend these in a stock housing.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
1 of 5 Binding Bad October 12, 2019
Reviewer: Ed from CO United States  
As others have had I have binding. Shiming and backing off third member , I was able to get somewhat smooth rotaion.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
3 of 5 A little disappointed October 9, 2019
Reviewer: Brian from New Mexico  
Usually SSD parts are top shelf at a great price. I have used overdrive gear sets before from Hot Racing and they were always smooth and trouble free. After installing these gears in my new Capra, there was a significant amount of binding and notchiness even with a substantial amount of grease. Until SSD can refine this design with a 2.0 overdrive setup and make them as smooth as the Hot Racing gears, I can not recommend these to anyone.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
4 of 5 Not a great fit in Axial Capra October 9, 2019
Reviewer: Jay Furtado from SANTA MARIA, CA United States  
I'll start by saying that I am aware these were not advertised to fit the Capra, but it uses AR44 based diffs, so I took a chance. These gears do bolt up, but do not mesh well in the Capra axle, but can be made to work. I ended up using the stock Axial pinion with the SSD ring gear and shimming the ring gear away from the pinion (using CRC shim set 7mm) and while it's still a bit notchier than I like, it works.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Cars & Trucks > Rock Crawlers
Cars & Trucks > Rock Crawlers > Scale & Trail Parts
Cars & Trucks > Rock Crawlers > Scale & Trail Parts > Axial SCX10 II
Cars & Trucks > Rock Crawlers > Scale & Trail Parts > Axial Wraith 1.9
Cars & Trucks
Cars & Trucks > Rock Crawlers > Scale & Trail Parts > SSD RC Trail King

Our Friends Say...