Titanium Hardware Kit – Vanquish Products VFD Transmission*
This kit includes replacement screws for assembling the VFD Transmission* using lightweight, high-strength titanium. Titanium offers an excellent strength-to-weight ratio and corrosion resistance—ideal for performance-focused builds.
Designed specifically for the VRD Carbon Spec VFD Transmission.
Note: This kit does not include all of the required M2x6mm cap head screws for the scale transmission tunnel shroud.
Installation: Follow the instructions below to avoid damage to components or hardware.
Includes:
4x M2x6mm Caphead
3x M3x6mm Buttonhead
4x M3x8mm Caphead
2x M3x6mm Caphead
12x M3x12mm Caphead
1x M3x16mm Caphead
1x M3x30mm Caphead
2x M3x12mm Caphead
1x M4 Nylock Nut
Installation Notice for Titanium Hardware:
Titanium fasteners require specific installation practices to prevent damage or failure.
When installing into plastic:
Do not use lubricant.
Hand-tighten only—do not overtighten, as titanium threads can easily strip plastic.
Avoid using impact drivers.
When installing into metal or threaded inserts:
Always use anti-seize lubricant (nickel- or moly-based) to prevent thread galling. e.g. Permatex 77124
Do not pair titanium screws with titanium nylock nuts. Use stainless steel or aluminum nylock nuts instead.
Torque values should be reduced by 20–30% compared to steel fasteners.
Ensure threads are clean and lubricated before installation.
Avoid dry fitting and use hand tools for final torque.
Failure to follow these guidelines may result in damaged threads or seized fasteners.
